服务热线:186 8877 9085
158 168 90599
简体中文 English
用户登录 用户注册


【耐油橡胶热收缩管】==>产品详情



Applications

It is made of irradiation cross-linked specially formulated flexible elastomeric compounds.  It is particularly suitable for resistance to aviation and diesel fuels, hydraulic fluids and lubricating oils, and chemical solvents. To protect cables, wiring harnesses and connectors in military vehicles. It is also well suited for the demands of motorsport cable harnesses.



Characteristics
  • Shrink ratio 2:1

  • RoHS and REACH compliant.

  •  Flexible, flame-retardant.

  • Excellent resistance to oil, diesel and hydraulic fluids.


Operating
  • Operating temperature: -75℃ ~ 150℃
  • Minimum fully recovery temperature: 150℃

Property
Property Requirement Test method Typical data

Longitudinal shrinkage
≤10% ASTM D 2671 ≤5%
Tensile strength 11.7MPa min. ASTM D 638 ≥13 MPa
Elongation at break 200% min. ASTM D 638 ≥400%
Tensile strength after ageing (150℃,168hrs) 10.3MPa min. ASTM D 638 ≥12 MPa
Elongation after ageing (150℃,168hrs) 200% min. ASTM D 638 ≥300%
Heat shock(200℃,4hrs) No crack ASTM D 2671 No crack
Low-temperature flexibility(-65℃,4hrs) No crack ASTM D 2671 No crack
Dielectric voltage withstand 2500V,60sec, no breakdown ASTM D 2671 No breakdown
Dielectric strength 11.9 KV/mm min. ASTM D 2671 ≥16KV/mm
Volume resistivity 109Ω·cm min. ASTM D 876 ≥1010cm
Copper corrosion No corrosion ASTM D 2671 No corrosion
Flammability Self-extinguishing within one minute ASTM D 2671 pass
(23℃,24hrs)Fluids resistance
Tensile strength 10.3MPa min. ASTM D 638 ≥12 MPa
Elongation at break 200% min. ASTM D 638 ≥300%
Dielectric strength 7.9 KV/mm min. ASTM D 2671 ≥12KV/mm

Sizes
Size As supplied (mm) After recovered (mm) Standard packing (m/roll)
inch mm Inside diameter (min.) Inside diameter (max.) Wall-thickness
3/32 Φ2.4 2.4 1.2 0.51±0.08 200
1/8 Φ3.2 3.2 1.6 0.76±0.15 100
3/16 Φ4.8 4.8 2.4 0.84±0.15 100
1/4 Φ6.4 6.4 3.2 0.89±0.15 100
3/8 Φ9.5 9.5 4.8 1.02±0.20 50
1/2 Φ12.7 12.7 6.4 1.22±0.20 50
3/4 Φ19.1 19.1 9.5 1.45±0.28 30
1 Φ25.4 25.4 12.7 1.78±0.28 30
1 1/2 Φ38.1 38.1 19.1 2.41±0.41 30
2 Φ50.8 50.8 25.4 2.79±0.41 25

其它说明
  • 符合标准:SAE AMS-DTL-23053/16
  • 颜色:标准颜色:黑色